OT Penetration Testing Services

Raxis OT penetration testing identifies exploitable vulnerabilities across SCADA, ICS, and industrial networks — without disrupting the operations that keep your business running.

Request a Quote
Schedule a 30 Minute Walkthrough

Operational Technology Is Under Attack

computer chip icon

IT and OT Have Converged. Attackers Know It.

Industrial control systems that once operated in isolation are now connected to enterprise networks, cloud platforms, and remote access tools. That convergence has created attack paths that didn’t exist a decade ago — and most organizations haven’t tested for them.

Robot arm icon

Traditional Pentests Don’t Speak OT

Standard network penetration tests can crash PLCs, trigger safety shutdowns, or disrupt production. OT environments demand specialized expertise — testers who understand industrial protocols, prioritize system availability, and know the difference between a vulnerability you can exploit and one that will take a plant offline.
Raxis X icon on report

Availability First. Always.

Raxis OT penetration testing is built around one non-negotiable principle: your operations keep running. Every test is scoped, coordinated, and executed with your team to ensure comprehensive security assessment without business disruption.

What We Test in OT

SCADA & ICS Security Assessment

Supervisory Control and Data Acquisition systems are the command layer of your industrial environment — and a high-value target for attackers. Raxis evaluates SCADA servers, historian databases, HMI interfaces, and the communication pathways between them for vulnerabilities that could allow unauthorized monitoring, data manipulation, or operational disruption.

PLC, RTU & Controller Testing

Programmable Logic Controllers, Remote Terminal Units, and other field devices are the workhorses of industrial automation. Raxis tests these controllers for default credentials, insecure firmware, unprotected programming interfaces, and protocol-level vulnerabilities that could allow an attacker to alter set points, inject false data, or shut down processes.

Industrial Network Architecture Review

Flat networks get breached. Raxis assesses your OT network architecture against defense-in-depth principles, evaluating segmentation between IT and OT zones, DMZ configurations, firewall rule sets, and communication paths between Purdue Model levels. We identify where an attacker crossing from the enterprise network could reach critical control systems — and where your segmentation actually holds.

Industrial Protocol Analysis

Modbus, DNP3, OPC UA, EtherNet/IP, PROFINET, BACnet — industrial protocols were designed for reliability, not security. Many transmit data in plaintext with no authentication. Raxis analyzes protocol traffic for exploitable weaknesses, including command injection, replay attacks, man-in-the-middle opportunities, and unauthorized read/write access to control system data.

Remote Access & VPN Assessment

Remote access to OT environments has exploded — for vendors, engineers, and operators. Raxis evaluates jump hosts, VPN configurations, remote desktop deployments, and third-party access pathways for weaknesses that could give an attacker a direct tunnel into your industrial network. We test whether your remote access controls would survive a determined adversary.

IT/OT Convergence & Boundary Testing

The boundary between IT and OT is where most real-world attacks cross over. Raxis specifically targets the systems, services, and data flows that bridge these environments — Active Directory dependencies, shared file servers, historian connections, and cloud integrations — to determine whether an attacker with enterprise network access can pivot into your industrial control systems.

OT Industries We Protect

OT security is not one-size-fits-all. Raxis brings sector-specific expertise to the industries where operational disruption carries the highest consequences.

Request A Quote Schedule Call

Energy & Utilities

Power generation, transmission, and distribution networks run on SCADA and ICS infrastructure governed by NERC CIP requirements. Raxis tests these environments to identify vulnerabilities that could impact grid reliability, safety systems, or regulatory compliance.

Transportation

Rail signaling systems, traffic management, port operations, and pipeline controls all depend on industrial automation. TSA Security Directives are driving mandatory security assessments across surface transportation. Raxis tests these environments to meet compliance and protect operations.

Water & Wastewater

Treatment plants and distribution networks rely on remote sensors, automated chemical dosing, and SCADA-controlled processes. A compromised controller doesn’t just leak data — it can affect public health. Raxis helps water utilities secure the systems that matter most.

Communications & Telecom

Network operations centers, power management systems, and infrastructure monitoring platforms often run on OT-adjacent technology. Raxis identifies where operational technology overlaps with communications infrastructure to close gaps before they’re exploited.

Manufacturing & Consumer Products

Production lines, robotics, quality control systems, and building automation all rely on industrial controllers and networks. Downtime is revenue loss. Raxis tests manufacturing OT environments to protect uptime, intellectual property, and safety systems.

How Raxis OT Penetration Testing Works

01

Scoping & Coordination

OT testing starts with trust. Raxis works closely with your operations, engineering, and security teams to define scope, identify critical assets, establish testing windows, and set ground rules that protect system availability. No surprises. No cowboy testing.

02

Architecture & Documentation Review

Before touching any live system, our engineers review network diagrams, asset inventories, firewall configurations, and remote access architectures. We identify high-risk pathways and potential pivot points on paper first — reducing risk and maximizing the value of active testing.

03

Passive Reconnaissance & Traffic Analysis

Raxis monitors OT network traffic to map communications, identify devices, and detect anomalies without sending a single packet that could disrupt operations. This non-intrusive phase reveals protocol usage, trust relationships, and unencrypted data flows across your industrial network.

04

Targeted Active Testing

With full coordination and your team standing by, Raxis performs controlled active testing against in-scope systems. We test authentication mechanisms, probe controller interfaces, attempt privilege escalation, and validate segmentation boundaries — always with availability as the top priority.

05

Pivoting & Attack Chain Demonstration

When we find a way in, we show you how far it goes. Raxis demonstrates realistic attack chains — from initial network access through lateral movement to reaching critical control systems. Our signature storyboard walkthroughs map the full path an attacker would take, complete with proof-of-concept evidence.

06

Reporting & Remediation Guidance

Findings are delivered through the Raxis One portal with risk-prioritized ratings, proof-of-concept documentation, and remediation steps tailored to OT environments — where patching isn’t always an option and compensating controls matter. We debrief with your team to ensure every finding is clear and actionable.

Compliance

OT Security Standards & Compliance

Raxis OT penetration testing supports compliance with the regulations and frameworks governing industrial control system security.

Contact Us Schedule Call

NERC CIP

Mandatory cybersecurity standards for the bulk electric system in North America

IEC 62443

International standard for industrial automation and control system security

NIST SP 800-82

Guide to operational technology security for industrial control systems

TSA Security Directives

Cybersecurity requirements for pipeline and surface transportation operators

HSE OG86

UK guidance for cyber security of industrial automation and control systems

CFATS

Chemical Facility Anti-Terrorism Standards for high-risk chemical facilities

API 1164

Pipeline SCADA security standard for the oil and gas industry

Why Raxis for OT Penetration Testing

Our engineers understand industrial protocols, control system architectures, and the operational realities of testing environments where availability is non-negotiable. This isn’t an IT pentest team dabbling in OT.

Request A Quote Schedule Call
Panama Canal OT locks

Availability-first methodology

Every test is coordinated with your operations team, scoped to protect critical processes, and executed with the caution that industrial environments demand. Raxis has never caused an unplanned outage during an OT engagement.

Full IT/OT boundary coverage

Most OT attacks originate in IT. Raxis tests the entire attack path — from enterprise network to control system — so you see the real risk, not just isolated OT findings.

Actionable reporting for OT realities

We know you can’t always patch a PLC on a running production line. Raxis provides compensating control recommendations alongside traditional remediation steps, so your team has options that work in the real world.

Request A Quote Schedule Call

Frequently Asked Questions About IoT Testing

SCADA systems, distributed control systems (DCS), programmable logic controllers (PLCs), remote terminal units (RTUs), human-machine interfaces (HMIs), historian servers, safety instrumented systems (SIS), building automation systems, and the network infrastructure connecting them. If it controls a physical process, we can assess it.

No. Raxis prioritizes availability above all else. Every test is scoped and coordinated with your operations team, and our engineers use non-intrusive techniques wherever possible. Active testing against live systems is performed only with explicit coordination and your team standing by.

Yes. Many OT assessments require physical proximity to field devices and industrial networks. Raxis engineers can test on-site at your facility, or we can deploy our Raxis Transporter device for remote testing with onsite-quality results.

OT environments use industrial protocols, embedded controllers, and legacy systems that standard penetration testing tools and techniques aren’t designed for — and can damage. OT pentesting requires specialized knowledge of industrial architectures, safety constraints, and the ability to test without disrupting physical processes.

Timelines depend on environment size and scope. A focused architecture review or segmentation assessment may take 1–2 weeks. A comprehensive ICS penetration test covering network assessment, controller testing, and IT/OT boundary analysis typically runs 2–4 weeks. We’ll provide a detailed timeline during scoping.

Yes. IT penetration tests don’t cover industrial protocols, control system devices, or the unique architecture of OT environments. More importantly, they don’t test the IT/OT boundary — which is the most common attack vector for industrial breaches. OT penetration testing fills a critical gap that IT testing alone cannot address.

OT testing targets industrial control systems — SCADA, PLCs, DCS, and the networks that run physical processes in facilities. IoT testing focuses on connected devices, their firmware, wireless communications, and cloud integrations. Both are specialized disciplines, and Raxis offers each as a dedicated service line.

Can’t find an Answer?

Name(Required)
Please let us know what's on your mind. Have a question for us? Ask away.
Popped Culture Newsletter
Would you like to opt in and receive our Popped Culture Newsletter? Typically about once a month, we send out an email with news on the latest in the cybersecurity industry, as well as insights on penetration testing trends.

Our security experts will contact you within 1 business day